HP EDGELINE EL300 P/N EMB-HP-EL300
Overview
The HPE Edgeline EL300 Converged Edge System provides an effective way to connect and manage all your Operational Technology (OT) Systems such as control systems, data acquisition systems and industrial networks with your existing Information Technology (IT) infrastructure.
Edgeline OTLink Dramatically Simplifies Deployment and Management of Operational Technologies (OT).
Increase Uptime with Edge Optimized System Management using HPE Edgeline Integrated System Manager HPE
Ruggedized designed for deployment in multiple environmental conditions
Standard interfaces
The Edgeline EL300 has the following interfaces on the carrier board.
- Dual 1GbE LAN ports (RJ45) with TSN support
- Single LAN port (RJ45) for Manageability
- TPM (Trusted platform Module) v2.0 (or) TCM
- Display: 1 X standard Display port & 1 X standard HDMI port
- USB (type A): 2 X USB 3.0/2.0 ports & 2 X USB 2.0 ports
- Audio connection 3x 3.5mm: Mic, Line In, Line out
- Serial 1x RS232 port
- SD Card slot
The EL300 also has two reset buttons that are customer accessible.
- iSM Reset: This reset pin will reboot the management processor
- CPU Reset: This reset pin will reboot the host processor
Daughter Card options
The EL300 can accept one (1) daughter card to expand the number of interface that is required by the application. A daughter card is not required and is only an option. There are four daughter cards available for use in the EL300
- Four (4) port 1GbE Ethernet with TSN
- Two (2) CAN Bus A/B/FD 2.0 optically isolated
- Two (2) port RS232/422/485 optically isolated
- One (1) 8 bits configurable DIO
Power Board options
The EL300 comes with 1 of 2 standard power board options. The first option is the 9v to 36V DC input option with or without ignition capabilities. This is a 3 or 5 pin phoenix connector (depending on model) on the front face plate of the EL300. This can support up to 190W with proper power supply.
The second power board option is the 12V DC power transfer board with a round pin lockable connector. This board accepts 12V DC input with limited power conditioning for up to 100W. HPE offers an external AC power adapter, but this is intended primarily for initial setup, troubleshooting, and maintenance usage rather than prolonged use in a production environment.
Remote Management
HPE Integrated System Manager (iSM) is a remote management subsystem that is embedded on the system board of the EL300 Converged Edge System. It allows configuration, update, and monitoring of the Edgeline EL300 from remote locations.
The iSM subsystem has its own network connection (wired, and optionally wired) and IP address to which administrators can connect through a dedicated management network that is separated from the main network. iSM provides a remote Web-based GUI, text console or RedFish API, which can be used to administer the Edgeline systems remotely.
iSM Standard includes basic configuration, management and reporting capabilities. Upgrading to an iSM Advanced license adds additional capability such as remote console and virtual media to improve ease of management.
The embedded Integrated System Controller (iSC) is the physical processor management module that runs the iSM software. An iSC module is embedded in every EL300 system.
Edgeline Infrastructure Manager (EIM) Standard is a software tool that allows management of multiple Edgeline EL300 Converged Edge Systemsthrough a single interface. Basic features are available via free download.
Wireless connectivity options
The EL300 can support up to 3 independent wireless connectivity options.
- iSM Wireless management. A dedicated Wi-Fi with single antenna integrated in to the iSC management module. This Wi-Fi is meant for remote management traffic but can be configured to allow host and application data as a pass through.
- One (1) M.2 2230 Wi-Fi/ Bluetooth module with dual antenna MIMO can be added as an option. This is customer accessible
- One (1) M.2 3042 Cellular 3G/4G/LTE wireless module with dual antenna MIMO capability can be added as an option. This iscustomer accessible
Components under heat sink
The EL300 is a fan less, sealed system. The processor, a power module, DIMM. and a single M.2 SATA 2242/2280 SSD (only for EL300) are located under the heat sink. This heat sink is not accessible by the customer and is installed using a security screw. For any warranty issues or service related concerns related to components under the heat sink, please call HPE support and PointNext.
Chassis Dimensions (H x W x D)
200.5mm (7.9″) tall, 232mm (9.14″) wide by 100mm (3.9″) deep – without antennas
Weight
P06211-B21: HPE Edgeline EL300 Converged Edge System – 4.91 KG (10.83 lbs.)
Notes: Configuration used includes One EL300 + 4 port Daughter card + 12v Transfer power board + Intel Core i5 + 8G DIMM + M.2 storage + 5x antenna
Power
Typical: 80W
Maximum: 90W
Storage options
The EL300 and EL300 v2 models offer the following storage options:
M.2 2242 / 2280 SATA SSD located under the top heat sink. Installed only at initial factory order and is not customer accessible. First instance of M.2 SATA drive ordered for the EL300 model will be installed in this location (not available on the EL300 v2 model).
M.2 2242 SATA SSD located inside customer access panel. First instance of M.2 SATA drive ordered for the EL300 v2 model will be installed in this location (not available on EL300 model).
M.2 2242 / 2280 SATA SSD located inside customer access panel. Second instance of M.2 SATA drive ordered will be installed in this location for both EL300 and EL300 v2 models.
M.2 2280 / 22110 PCIe NVMe SSD located inside customer access panel for both models (NVMe SSD SKU isn’t available as of now).
Warranty
This product is covered by a global limited warranty and supported by Hewlett Packard Enterprise Services and a worldwide network of Hewlett Packard Enterprise Authorized Partner Ready Resellers. Hardware diagnostic support and repair is available for three years from date of purchase. Support for initial setup is available for 90 days from date of purchase. Enhancements to the
warranty services are available through HPE services or customized service agreements. Hard drives have either a one year or three-year warranty; refer to the specific hard drive QuickSpecs for details.
Notes: Chassis Warranty includes 3-Year Parts, 3-Year Labor, 3-Year Onsite support with next business day response. Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1) Optional CSR parts are designed for easy replacement but may involve added complexity. Customers may choose to have Hewlett Packard Enterprise replace Optional CSR parts at no charge. 2) No CSR parts require a Hewlett Packard Enterprise authorized service provider to replace the part.
Additional information regarding worldwide limited warranty and technical support is available at: https://techlibrary.hpe.com/us/en/enterprise/servers/warranty/